|
Post by Jef on Mar 30, 2014 21:51:09 GMT
Over the last three years, I have very nearly lost three models, and I think each loss of control was due to using a #2 type height limiter / altimeter etc, by RC Electronics. In fairness to them, they informed me that there were updates available, and I thought I had implemented them, but when I checked the errant unit today - having made use of some very soft mud to plough into - I found it to still be running Firmware version 2.15.
If you have one of these units, please make sure it is running that the latest firmware (currently 2.17, written March 2014) Good luck!
Jef
|
|
|
Post by Jef on Jun 21, 2016 21:48:50 GMT
Despite updating to the latest version, the errant switch caused the crash of yet another model in May.
The switch has been disabled and binned.
Repairs are in progress.
|
|