|
|
Post by JG on Apr 28, 2014 14:33:27 GMT
All done now with covering, just fitting 2 servos now  Attachments:
|
|
|
|
Post by JG on May 26, 2014 8:15:45 GMT
The Elan is now sold and being shipped to USA |
|
|
|
Post by JG on Jul 30, 2014 13:10:17 GMT
Just a update on the Elan, it has now been converted to electric and had air brakes fitted and a removable tail sections.
|
|
|
|
Post by JG on Nov 13, 2014 11:50:16 GMT
Hello Everyone. Just made a start on another Elan, just doing the rudder and elevator  |
|
|
|
Post by JG on Nov 17, 2014 11:51:37 GMT
Here is a picture of the Rudder & Elevator so far and as you can see other bits are being done  |
|
|
|
Post by JG on Nov 27, 2014 14:46:27 GMT
This is a picture of the inner wing panel just being dry fit with a electric spoiler  |
|
|
|
Post by JG on Dec 7, 2014 19:58:59 GMT
The Elan is all build now, just got a sanding day ahead |
|
|
|
Post by JG on Dec 8, 2014 18:02:28 GMT
Here is the fuselage  |
|
|
|
Post by JG on Dec 17, 2014 14:35:45 GMT
Afternoon All, Now ready to be covered   |
|
|
|
Post by Jef on Dec 20, 2014 13:36:04 GMT
Looking good JG.
Sometimes we develop better ways of achieving the same result / get a better result, when repeating a complex set of operations like building a model.
Have you done anything differently on this one?
|
|
|
|
Post by JG on Dec 20, 2014 14:02:41 GMT
Afternoon Jef, The person who has brought the model has had a nose tow release fitted, and electric spoilers, as wood wise the wing tips was made up of 2 balsa sheets and only went as far as the sheeting on the wing but i have changed it to a solid black and runs the length of the wing tip and cut 3 holes to lighten them up, wing tip spars are only balsa strips i changed them to spruce, think that's about it .... must say the colours i am not sure on yet if i like it or not but the buyer picked them  |
|
|
|
Post by JG on Dec 26, 2014 18:39:06 GMT
Just a quick update the Elan should be fully covered by the end of next week so watch this space |
|
|
|
Post by Jef on Dec 26, 2014 20:25:32 GMT
Looking forward to seeing this!
|
|
|
|
Post by JG on Dec 27, 2014 17:13:39 GMT
Evening Jef, Had the customer email this morning asking if he can collect today, still had the rear fins to cover and glue on, so that's where i have been this afternoon, but all done apart from fitting tow hook, inner snake push rods and servo horns. Will post some pictures after it's been collected |
|
|
|
Post by JG on Dec 27, 2014 19:32:01 GMT
|
|
